Example: A shift code should be written additionally to an existing fix text „xxx“.
In the first shift (early shift) at 6.15 am „xxx 001“.
In the second shift (late shift) at 12.15 pm „xxx 002“.
In the third shift (night shift) at 20.15 am „xxx 003“.
Press the direct button <Shift code> (1).
The menu <Object settings (Shift Code)> (2) is faded in.
In the functional area <Global settings> (3) carry out the requested settings for the
font parameters and display options. You will find further information in the Chapter
Object settings.
Note: In the setting fields <Position X/Y> (4) the system shows automatically the next
possible position of the shift code after the already existing fix text. This position
can be of course changed!
Now change to the functional area <Shift code> (5). The selection of the functional
area happens by clicking on the accordant register card (16).
Press on the display field <Shift times> (6). A setting block (7) opens.
Select the desired value by scrolling the hours and minutes blöock. The setting block
is closed by clicking on the block again or on thes display field <Shift times> and the
value is transferred to the field.
Now click in the display field <Shift code> (8). A keyboard field (9) opens for input.
Now enter „001“.
Press the button <Return > (10) of the keyboard field. The entered characters are
taken over and are displayed in the display field.
You will find further information regarding the working with keyboard
fields in the chapter Keyboard fields (page 62)!
Now press the button <Add> (11). The settings that have been made are transferred
to the management window (12).
To Next Page
Loading...
