Leibinger JET2neo - Bar and Gaps (Space); Bar Height; Character Space (ICG); Default Settings of Styles (Changing of the Barcode Style Sett.)

Group 8 Job editor Page 219
JET2 neo Release R1.12 en
In the functional area <Style> the style types (representations) of the barcode can be
selected and their basic settings changed. The following styles are available:
 Fine
 Middle
 Large
 User define
8.6.1.3.1 Bar and gaps (space)
In the display fields the width of the bars and gaps (between 01-12) of the individual
barcode elements is defined.
8.6.1.3.2 Character space (ICG)
In the display field the desired gap between the elements is set.
8.6.1.3.3 Bar height
In the display field the height of the barcode is set. Any bar height between 5 and 24 can
be selected.
8.6.1.3.4 Styles (Selection of the barcode styles)
The desired styles are selected by activating the appropriate control box.
8.6.1.3.5 Default settings of styles (Changing of the barcode style sett.)
With the button <Default settings> the pre-defined settings (bar/space/character space)
of the individual styles can be changed.
The submenu „Default settings“ is opened for this. The procedure is the same as those
described above.