Leibinger JET2neo - Figure 92 - Test Menu (Special Functions); Special Functions

Group 7 Data entry/Programming Page 155
JET2 neo Release R1.12 en
7.2.4.4.2 Special functions
Under the register card <Special functions> the following functions are available:
 Pressureless
 Calc delay time
 Constant bleed
 Calc last PG drops
 Fill up routine
 Ignore error messages and warnings
 Mix only ink
 Drain routine (deplete ink/deplete solvent)
 Mix only solvent
The availability of individual functions depends on the current device conditions.
Figure 92
Hydraulic-/Printhead test menu – functional area „Special functions”
1 – Button <Calc delay time>
7 – Button <Fill up routine>
2 – Button <Calc last PG-drops>
8 – Button <Deplete ink>
3 – Button <Constant bleed>
9 – Button <Deplete solvent>
4 – Button <Pressureless>
10 – Button
<Ignore error messages and warnings>
5 – Button <Mix only ink>
6 – Button <Mix only solvent>
11 – Button <Quick Off>
1. Calc delay time:
With the button <Calc delay time> a new measurement of the current delay time is
started. The value is updated after approx. 15 seconds. The value is output in msec.
2
5
11
1
3
8
9
6
10
7
4