Leibinger JET2neo - Factory Settings; Figure 70 - Reset Device to Factory Settings

Group 7 Data entry/Programming Page 125
JET2 neo Release R1.12 en
7.2.3.1.6 Factory Settings
With the button <Set to Factory Values> you can reset the printer adjustments to the
standard settings.
The consequences of resetting to the factory settings should be well
considered!
Figure 70
Reset device to factory settings
1 – Button <Set to Factory Values>
4 – Button <OK ()>
2 – Safety query <Continue>
5 – Message <Restart>
3 – Button <Cancel>
1
3
2
5
8
4
4