Group 10 Equipping/Maintenance Page 267
JET2 neo Release R1.12 en
Dangerous electrical voltage!
After opening the head cover and turning on the „safety contact
bypass“ on the head, arbitrarily dangerous voltage occurs. Only
authorized staff or Leibinger service technicians can work under
voltage!
Inflammable (Risk of fire)!
Combustible gases and liquids cause serious burns. Sources of
ignition must be kept away from the print head and the device!
Dangerous material in the machine!
Read the safety leaflets and the regulations on personal safety
equipment!
Risk of injury!
Ink escapes from the head aperture. Spraying of ink into the eyes can
cause blindness. Eye protection is necessary!
10.2.1 Daily servicing work
The daily servicing work includes the checking of the print head and in particular of the
deflector unit, the charging electrode as well as of the guides for dirt. If necessary the
components must be cleaned as described in the chapter Cleaning.
To Next Page
Loading...
