Leibinger JET2neo - Figure 116 - Printstyle Parameter Values (Print Height); Font Width (Stroke Distance); Print Height

Group 8 Job editor Page 189
JET2 neo Release R1.12 en
8.5.1.1 Print height
The setting determines the print height. The print height is determined by the vertical drop
distance. The value can set between 1 – 100%.
The set value is shown on the accordant display field.
As higher the entered value, as larger the distance between the single dots.
Figure 116
Print height
8.5.1.2 Font width (Stroke distance)
The setting determines the print width. The print width is determined by the horizontal drop
distance of the strokes. The input happens in the measurement which has been selected
in the basic settings.
The set value is shown on the accordant display field.
As higher the entered value, as larger the distance between the several strokes.