Leibinger JET2neo - Direct Printstart; Figure 58 Direct Printstart

Group 7 Data entry/Programming Page 113
JET2 neo Release R1.12 en
7.2.2.7 Direct printstart
With this function the printing process of a job can be started directly after loading without
further intervention by the user.
Proceeding:
 Activate the automatic print start by clicking on the control box (2). Whether the
function is activated is displayed by a  in the control box.
Figure 58
Direct printstart
Direct printstart switched off
Direct printstart switched on
1 – Register card <Extra>
2 – Control box <Direct printstart>
1
2