EasyManua.ls Logo

Leibinger JET2neo - 4.2 Electrical Connection Values; 4.3 Ambient Conditions; 4.4 Interfaces, Inputs, Outputs

Leibinger JET2neo
294 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Group 3 Accident prevention Page 25
JET2 neo Release R1.12 en
3.4 Measures in the event of accidental release (spillage)
PRECAUTIONARY
MEASURES
Switch off sources of ignition and ventilate room. Keep personnel
that are not absolutely necessary away. Do not inhale any vapour.
Observe the protective measures listed.
ENVIRONMENTAL
PROTECTION
MEASURES
DO NOT allow to enter waste water channels or waters.
Should the product enter waste water channels or the drainage
system the local water supply authority must be informed
immediately. In the event of contamination of streams, rivers or
lakes inform the national water authorities. Vapour is heavier than
air and can spread out on the ground. In combination with air it can
form an explosive mixture.
RESTORATION
Restrict and suck up spilled substances with a non-combustible
absorbent material (e.g. sand, earth, vermiculite, infusorial earth)
and collect in a suitable container for removal. Preferably clean
areas with spilled substances with a detergent. Avoid solvents.

Table of Contents

Other manuals for Leibinger JET2neo

Related product manuals