Leibinger JET2neo - Shift Code; Construction of the Functional Area Shift Code; Figure 142 - Print Elements (Shift Code Menu)

Page 232 Job editor Group 8
Release R1.12 en JET2 neo
8.6.4 Shift code
Provides the integration of a text element which is printed in predefined periods (shift
times) as well as a definition of the accordant parameters.
Note:
The changing text can be also combined with other printing elements which will not
change by the predefined periods (only the „shift-defined“ text).
8.6.4.1 Construction of the functional area Shift code
In the management window (5) all defined shift times with the corresponding shift codes
are listed. Up to 4 shift codes can be managed.
In the display field <Shift code management> (4) the number of shift times still available;
i.e. the shift times which can still be defined, is displayed.
Figure 142
Print elements (Counter menu (Functional area “Shift code”))
1 – Register cards
6 – Button <Add>
2 – Display field <Shift times>
7 – Button <Remove>
3 – Display field <Shiftcode>
8 – Button <OK ()>
4 – Display field <Shift code management>
9 – Button<Close>
5 – Management window
9
3
2
1
6
4
5
8
7