Leibinger JET2neo - Figure 94 - Ink-;Solvent Delivery

Group 7 Data entry/Programming Page 157
JET2 neo Release R1.12 en
Attention!
By adding the solvent the ink can be diluted too strong. Therefore this
function should only be carried out by qualified personnel.
4. Pressureless:
With the button<Pressureless> the system pressure can be relieved. The function is
only available when the control is deactivated!
5. Mix only ink/Mix only solvent:
Figure 94
Ink-/Solvent delivery (Mix only ...)
1 – Button <Mix only ink>
4 – Message <Adding “Solvent”>
2 – Button <Mix only solvent>
5 – Button <Stop>
3 – Message <Adding “Ink”>
1
5
4
2
3
5