Press the direct button <Date/Time> (1).
The menu <Object settings (Date/Time)> (2) is faded in.
Carry out the requested settings for the font parameters and display options in the
functional area <Global settings> (3). You will find further information in the Chapter
Object settings.
Note:
In the setting fields <Position X/Y> (4 )the system shows automatically the
next possible position of the object after an existing fix text. This position can or
has to be changed depending on the input situation!
Now change to the functional area <Date/Time> (5).
Press the following buttons (6-9) in the appropriate sequence to generate the current
date input:
„Day“ „/“ „Month“ „/“ „Year“
The formatting of the inputs is shown on the display field <Content> (10).
Now set the requested expiry date of 15 days. The setting can be carried out with the
+/- buttons (11), but the value will be increased or reduced by one step.
or
Click in the accordant display field <Expiry date offset> (12). A number block (13)
opens for input in which you can enter the value.
You will find further information regarding the working with number
blocks in the chapter Number block (page 61)!
Press the button <OK ()> (14) to take over the inputs and to close the menu or press
the button <Close> (15) to leave the menu without saving the inputs.
The applied expiry date is also displayed in the menu <Job editor>.
Click on the date element to mark it. It is now displayed with a red object frame.
Position the element with the direction buttons of the job editor or use the drag-function
to shift the element.
To Next Page
Loading...
