The following tables show the data transmission, the buffer content and the print-out. It
also shows how the settings for the <wildcards> and the <offset> affect the displayed
characters and therefor the print-out.
The external data can be sent with any terminal software like e.g. Hyperterminal. You
have to make sure that the serial interface parameters of the terminal software
correspond with the parameters of the JET2neo interface.
Deleting the input buffer
The current content of the input buffer can be deleted at any time. For this you can use
the respective option in the <Main menu>:
<Main menu>-<Extras>-<Delete ExternText memory>
To Next Page
Loading...
