Group 5 Transport/Start up Page 39
JET2 neo Release R1.12 en
Inflammable (Risk of fire)!
Combustible gases and liquids cause serious burns. Sources of
ignition must be kept away from the device!
Attention!
Before the filling process a static discharge has to be carried out
necessarily! For this you have to touch the cabinet of the printer
directly or you have to stand with ESD-shoes on an grounded surface
before the filling or during the process!
The sealing of the refill bottle should be not opened!
Now proceed absolutely according to the instructions in the chapter Execution of the
Tag-activation and refilling (page 260) in the group Equipping/Maintenance.
You will find supplementary information about the TAG-reader in the
chapter TAG-reader (page 260).
To Next Page
Loading...
