Page 68 Operation – Elements and procedures Group 6
Release R1.12 en JET2 neo
Press on the status field <Product counter> (1).
The menu <Product counter> (2) is faded in. As standard the register card <Counter>
(3) is activated and the current value of the counter appears in the display „Product
counter“ (4) display.
Confirm the reset of the counter again by pressing on the button <Reset> (5) or cancel
the process with the button<Cancel> (6).
Attention! If job counters (object counters) whose existing settings
<Counter reset> have been applied with the attribute „Product Counter“
are available in the current job, they will be also reset.
You will find further information also in the chapter Change product
counter (page 69) as well as in the chapter Product counter (page 106)!
To Next Page
Loading...
