Service
Tables
SERVICE PROGRAM MODE TABLES
SM 5-53 B079/B082
SP5 Mode Number Function and [Setting]
2 Vendor ID Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company. DFU
[0x0000~0xFFFF/ 0x05CA /1]
3 Product ID Sets the product ID. DFU
[0x0000~0xFFFF/0x0403/1]
5844
4 Device Release Number Sets the device release number of the BCD (binary
coded decimal) display.
[0000~9999/0100/1] DFU
Enter as a decimal number. NCS converts the
number to hexadecimal number recognized as the
BCD.
Delivery Server Setting Provides items for delivery server settings.
1 FTP Port No. Sets the FTP port number used when image files to
the Scan Router Server.
[0~65535 / 3670 / 1]
2 IP Address Use this SP to set the Scan Router Server address.
The IP address under the transfer tab can be
referenced by the initial system setting.
[0~0xFFFFFFFF / 0x00]
3 Retry Interval Determines the time interval between retries before
the machine returns to standby after an error
occurs during an image transfer with the delivery
scanner or SMTP server.
[60~900 / 300 / 1]
4 Number of Retries Determines the number of retries before the
machine returns to standby after an error occurs
during an image transfer with the delivery or SMTP
server.
[0~99 / 3 / 1]
5* Capture Server IP Address Sets the capture server IP address for the capture
function. (eCabinet UC1).
[0~0xFFFFFFFF / 0x00 / ]
MLB2 is required to use this feature.
6* Delivery Error Display Time
Netfiles: Jobs to be printed
from the document server
using a PC and the
DeskTopBinder software
Use this setting to determine the length of time the
prompt message is displayed when a test error
occurs during document transfer with the NetFile
application and an external device.
[0~999 / 300 / 1]
5845
7* Delivery Options Connects to the Scan Router server for delivery of
scanned documents.
[0~1 / 0 / 1]
0: No connection to Scan Router delivery server
1: Connected to Scan Router server for delivery
of scanned documents.
UCS Settings 5846
1 Machine ID (For Delivery
Server)
Displays the unique device ID in use by the delivery
server directory. The value is only displayed and
cannot be changed. This ID is created from the NIC
MAC or IEEE 1394 EUI. The ID is displayed as
either 6-byle or 8-byte binary.
To Next Page
Loading...
