SERVICE PROGRAM MODE TABLES
B079/B082 5-58 SM
SP5 Mode Number Function and [Setting]
5959 Image Timing Adj. Sets the amount of time the machine waits to
project the latent image onto the drum after the
feed/development motor, main motor, and
fusing/feed-out motor switch on.
[0~60 / 0 / 1 s]
This setting allows the drum and hot roller to turn
freely in order to allow more time for cleaning
toner and carbon that has accumulated on the hot
roller strippers. Changing this can improve image
quality but can also slow down the first print time.
Adjust only when necessary.
Also see SP 3905.
5961* Large Capacity Exit Mode Selects whether or not all stapled copies are sent
to Shift Tray 1 when the Two-Tray finisher is
installed.
[0, 1 / 1 ]
1: Enabled
0: Disabled
Switches on/off the use of 8-kai, and 16-kai China
paper sizes.
[0~1 / 0 / 1]
0: Off. 8-kai, 16-kai paper sizes are not displayed
after pressing the selection key.
1: On. 8-kai, 16-kai paper sizes displayed after
pressing the selection key. For this setting to
take effect, “2” must be selected for SP5131.
With “2” (Europe) selected for SP5131, the ADF
can select 16-kai LEF. With SP5962 set for “0”
(Off), the nearest size is detected as shown
below.
Size Loaded Size Detected
16-kai SEF B5 SEF
16-kai LEF B5 LEF
5962 8K 16K Paper Mode
8-kai SEF B4 LEF
5970* Debug Serial Output
DFU
5971
Operation Panel Coordinate Adj. Determines whether the machine clears memory
after calibrating the coordinates of the touch
screen are calibrated.
[0~1 / 0 / 1]
0: Off. No memory clear.
1: On. Clears memory. The memory clear
execution is the same as executing SP5801 1
(All).
5974* Cherry Server Lite/ Switch to Full Switches writing between the Scan Router lite
application provided and the optional full version.
0: Lite, 1: Full
SMC Printout
1 All (Data List)
2 SP (Mode Data List)
3 User Program
4 Logging Data
5990
5 Diagnostic Report
Prints all of the system parameter lists for the item
selected. (! 5.1.6) Input the number for the item
that you want to print, and then press :
“Execute” on the touch panel.
To Next Page
Loading...
