Ricoh B079 - Page 779

BIT SWITCHES
SM 53 B547
Fax Option
B547
FAX Switch 09 SP No. 1-102-010
No FUNCTION COMMENTS
0
to
2
Independent dot erase level
(monotone background special
original 1 mode)
The value can be between 0 (Off) and 7.
For a higher threshold, input a higher value (larger
dots are erased).
Default setting: 6
This setting is independent from the threshold
setting specified by the copier SP modes.
3-7 Not used Do not change the settings.
FAX Switch 0A SP No. 1-102-011
No FUNCTION COMMENTS
0
to
2
Independent dot erase level
(colored background special
original 2 mode)
The value can be between 0 (Off) and 7.
For a higher threshold, input a higher value (larger
dots are erased).
Default setting: 1
This setting is independent from the threshold
setting specified by the copier SP modes.
3-7 Not used Do not change the settings.
FAX Switch 0B SP No. 1-102-012
No FUNCTION COMMENTS
0
to
3
Scan margin setting (right and left margin in book scan ADF mode)
The setting can be between 0 and F (H) (unit 0.5 mm).
Default setting: 2 mm
4
to
7
Scan margin setting (top and bottom margin in book scan and ADF mode)
The setting can be between 0 and 7 (H) (unit 0.5 mm).
Default setting: 3 mm
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA