Ricoh B079 - Page 781

BIT SWITCHES
SM 55 B547
Fax Option
B547
FAX Switch 0E SP No. 1-102-015
No FUNCTION COMMENTS
0
Wait time for the next page
when scanning a book original
into memory
0: 60 s
1: 30 s
This bit determines how long the machine waits for
the next page when scanning a book original for
memory transmission. If this timer expires, the
machine transmits all the pages scanned so far as
one document.
Note: In immediate tx or parallel memory tx, the wait
time for the next page is 10 s.
1
Scan resolution unit
0: mm
1: inches
This bit determines which resolution unit will be
used for scanning a fax message.
Default setting: mm
2
ADF jam alarm display time
0: 60 s
1: 30 s
The bit is only effective when bit 0 of scanner bit
switch 0C is “0”.
This bit determines how long the machine displays
the ADF jam alarm after a jam occurred.
3-7 Not used Do not change the settings.
FAX Switch 0F SP No. 1-102-016
No FUNCTION COMMENTS
0
Image rotation before
transmission (A4/LT sideways)
0: Disabled
1: Enabled
This bit determines whether the machine rotates the
scanned image by 90 degrees before transmission.
If this bit is set at 1, A4 (LT) sideways images (297
mm width in the protocol) will be transmitted as A4
(LT) lengthwise images (216 mm width in the
protocol).
1 Not used Do not change the setting.
2
Image rotation before
transmission (A5/HLT
lengthwise)
0: Disabled
1: Enabled
This bit determines whether the machine rotates the
scanned image by 90 degrees before transmission.
If this bit is set at “1”, A5 (HLT) lengthwise images
will be transmitted as A4 (LT) width images (216
mm width in the protocol).
3-7 Not used Do not change the settings.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA