Ricoh IM C300 - Page 1009

SP1-XXX (Feed)
SM Appendices
3-17 D0CA/D0C9/D0C8/D0CB
Appendices
SP Mode Tables
SP No. Large Category Small Category ENG
or CTL
[Min to
Max/Init./Step]
1-106-003 Fusing
Temperature
Display
Pressure: Center ENG [-20 to 250 / 0 /
1deg/step]
1-106-005 Fusing
Temperature
Display
Pressure: End Rear ENG [-20 to 250 / 0 /
1deg/step]
1-106-006 Fusing
Temperature
Display
Pressure: End Front ENG [-20 to 250 / 0 /
1deg/step]
1-109-001 Rotation Speed
Setting
Overshoot Prevent Rotation ENG* [0 to 3 / 0 / 1/step]
0: 89mm/s (Type a,b)
1: 178mm/s (Type
a,b)
2: 212mm/s (Type b)
3: 252mm/s (Type b)
1-109-002 Rotation Speed
Setting
After Reload Rotation ENG* [0 to 3 / 0 / 1/step]
0: 89mm/s (Type a,b)
1: 178mm/s (Type
a,b)
2: 212mm/s (Type b)
3: 252mm/s (Type b)
1-109-003 Rotation Speed
Setting
Print Ready Rotation ENG* [0 to 3 / 0 / 1/step]
0: 89mm/s (Type a,b)
1: 178mm/s (Type
a,b)
2: 212mm/s (Type b)
3: 252mm/s (Type b)
1-112-002 Image Processing
Temp. Correct
Temp.:Plain:Center:Energy
Saving
ENG* IM C300 series: [-30
to 20 / 13 /
1deg/step]
IM C400 series: [-30
to 20 / 16 /
1deg/step]
1-112-004 Image Processing
Temp. Correct
Temp.:Plain:Press:Energy
Saving
ENG* [-30 to 20 / 0 /
1deg/step]
1-113-001 Curl Correction Execute Pattern ENG* [0 to 1 / 0 / 1/step]
0: OFF