Paper Feed and Registration (IM C300 Series)
D0CA/D0C9/D0C8/D0CB 7-82 SM
7.12.3 TRAY LIFT MECHANISM
The tray lift motor (M15) [D] rotates the gear [C] and the gear makes the rack [F] move.
The movement of the rack pulls the spring and this moves the bottom plate lift arm [B].
The arm lifts the bottom plate [A].
The position of the bottom plate is detected by the tray lift sensor (S35) [E]. This machine does
not use motor control to detect the bottom plate position.
Callout Item Callout Item
[A] Bottom Plate [D] Tray Lift Motor (M15)
[B] Bottom Plate Lift Arm [E] Tray Lift Sensor (S35)
[C] Bottom Plate Lift Gear [F] Rack and Pinion Mechanism
To Next Page
Loading...
