Service Program Mode
SM Appendices
3-1 D0CA/D0C9/D0C8/D0CB
SP Mode Tables
3. APPENDICES: SP MODE TABLES
3.1 SERVICE PROGRAM MODE
• Make sure that the data-in LED (
) is not on before you go into the SP mode. This
LED indicates that some data is coming to the machine. When the LED is on, wait for
the copier to process the data.
3.1.1 ENABLING AND DISABLING SERVICE PROGRAM MODE
Make sure that the data-in LED (
) is not on before you go into the SP mode. This LED
indicates that some data is coming to the machine. When the LED is on, wait for the copier to
process the data.
• The Service Program Mode is for use by service representatives only. If this mode is
used by anyone other than service representatives for any reason, data might be
deleted or settings might be changed. In such case, product quality cannot be
guaranteed any more.
Entering SP Mode
If there are no Classic Application (copy/printer/scanner/fax) icons on the HOME screen, follow
the procedure below to display the number keyboard.
To Next Page
Loading...
