Firmware Update (Removable Media)
D0CA/D0C9/D0C8/D0CB 5-10 SM
7. After the data waiting screen is displayed, the update is automatically started. When the
firmware update is complete, "Update done" is displayed.
The figures at the lower right of the display indicate "Number of updated items/ All items to
be updated".
8. Turning the main power OFF.
9. Remove the removable media from the slot on the operation panel.
10. Turn the main power ON again, and check whether the machine is operating normally.
Using the Slot on the Operation Panel (Reserve)
Firmware update can be executed at the programmed date and time.
1. Enter the SP mode.
2. Touch [Firmware Update].
To Next Page
Loading...
