1-Bin Tray Paper Remaining Sensor
D574 6 SM
2.2 1-BIN TRAY PAPER REMAINING SENSOR
1. Remove the 1-bin tray unit. (See “1 Bin Tray BN1040” in the mainframe service manual)
2. Remove the 1-bin tray upper cover [A].
3. Remove the 1-bin tray paper remaining sensor bracket [A].
4. Remove the 1-bin tray paper remaining sensor [A].
5. Remove the antistatic cover from the the 1-bin tray paper remaining sensor.
To Next Page
Loading...
