Image Adjustment
SM 4-265 D0CA/D0C9/D0C8/D0CB
&
Adjustment
Open the front cover.
1. Remove the paper exit front cover, paper exit upper cover and paper exit tray. (Paper Exit
Front Cover/Paper Exit Upper Cover/Paper Exit Tray for IM C400SRF)
2. Remove the staple unit [A].
3. Rotate the knob(s) shown in the photo [A] to [D] at 90 degree intervals until the SP value for
the affected color(s) is 0.
• There are two knobs on each of the two LD units. A click is felt every 90 degree
rotation.
• Turning the knob clockwise by 90 degrees changes the SP value by -1.
• Turning the knob counter-clockwise by 90 degrees changes the SP value by +1.
• Example:
SP value for magenta in Step 4 was “+6” Turn knob [C] 6 clicks (1 1/2
rotations) clockwise.
• SP value for yellow in Step 4 was “-7”
Turn knob [D] 7 clicks (1 3/4 rotations)
counter-clockwise.
To Next Page
Loading...
