Ricoh IM C300

Image/Paper Transfer
SM 4-127 D0CA/D0C9/D0C8/D0CB
Replacement
&
Adjustment
3. Remove the cover [A]. ( × 2)
4. Remove the gear [A] and ITB lift motor (M14) [B]. ( × 2)
4.12.3 ITB LIFT HP SENSOR (S33)
1. Remove the following parts.
• Right Rear Cover
• Rear Cover
• Upper Left Cover
• Left Cover
• Controller Box
• PSU Exhaust Fan (FAN4)
• PSU (AC) (PCB17), PSU (DC) (PCB16)
• High-Voltage Power Supply (Development) (PCB22)
• High-Voltage Power Supply (Transfer) (PCB23)
• Toner Bottle Sensor Board (PCB7)
• Toner Supply Motors (M1-M4)
• Toner Supply Unit (Toner Transport Section)
• Development Motor (CMY) (M9)
• Drum Motor (CMY) (M10)
• Drum Motor (M11)
• Development Clutch (K) (CL5)
• AC Detection Board (PCB18)