Paper Feed
D0CA/D0C9/D0C8/D0CB 4-170 SM
Tray Paper End Sensor (main unit) (S30)
1. Remove the waste toner bottle. (Waste Toner Bottle)
2. Remove the tray paper end sensor (main unit) (S30) [A]. (hook × 2)
When reattaching the tray paper end sensor (main unit) (S30), make sure that the shaft of
the feeler is hooked onto the bracket [A].
Tray Lift Sensor (S35)
1. Remove the waste toner bottle. (Waste Toner Bottle)
2. Remove the tray lift sensor (S35) [A]. (hook × 2)
To Next Page
Loading...
