Ricoh IM C300

Image Adjustment
SM 4-255 D0CA/D0C9/D0C8/D0CB
Replacement
&
Adjustment
• Trailing edge (sub-scan direction):
D = 3.25 ± 2.75 mm
• Side to side (main-scan direction):
A = C = 2.25 ± 1.75 mm
Registration Standard
Adjusts the side-to-side registration for each paper feed station. Use SP
mode (SP1-002) to adjust the side-to-side registration for the optional
paper feed unit and duplex unit.
SP No. SP Name Range
SP1-002-001 Side-to-Side Registration: By-pass Table ± 4.0 mm
SP1-002-002 Side-to-Side Registration: Tray 1 ± 4.0 mm
SP1-002-003 Side-to-Side Registration: Tray 2 ± 4.0 mm
SP1-002-004 Side-to-Side Registration: Tray 3 ± 4.0 mm
SP1-002-005 Side-to-Side Registration: Duplex ± 4.0 mm
Adjusts the leading edge registration for each paper type and process
line speed. Use SP mode (SP1-001) to adjust the leading edge registration.
SP No. SP Name Range
SP1-001-001 Leading Edge Registration: Tray: Plain ± 9.0 mm
SP1-001-002 Leading Edge Registration: Tray: Middle Thick ± 9.0 mm
SP1-001-003 Leading Edge Registration: Tray: Thick ± 9.0 mm
SP1-001-005 Leading Edge Registration: Tray: Plain: 1200 ± 9.0 mm
SP1-001-006 Leading Edge Registration: Tray: Middle Thick: 1200 ± 9.0 mm
SP1-001-007 Leading Edge Registration: By-pass: Plain ± 9.0 mm
SP1-001-008 Leading Edge Registration: By-pass: Middle Thick ± 9.0 mm
SP1-001-009 Leading Edge Registration: By-pass: Thick ± 9.0 mm
SP1-001-012 Leading Edge Registration: By-pass: Plain: 1200 ± 9.0 mm
SP1-001-013 Leading Edge Registration: By-pass: Middle Thick: 1200 ± 9.0 mm
SP1-001-014 Leading Edge Registration: Duplex: Plain ± 9.0 mm
SP1-001-015 Leading Edge Registration: Duplex: Middle Thick ± 9.0 mm
SP1-001-016 Leading Edge Registration: Duplex: Thick ± 9.0 mm
SP1-001-017 Leading Edge Registration: Tray: Special 1 ± 9.0 mm
SP1-001-018 Leading Edge Registration: By-pass: Special 1 ± 9.0 mm
SP1-001-019 Leading Edge Registration: Duplex: Plain: 1200 ± 9.0 mm
SP1-001-020 Leading Edge Registration: Duplex: Middle Thick: 1200 ± 9.0 mm