Mechanism
SM 8-23 D0CA/D0C9/D0C8/D0CB
8.2.4 CONTROLLING THE POWER SUPPLY
Exiting Energy Saving Modes
Because this model of Smart Operation Panel has no hardware keys, the MFP exits from
energy saving mode when the user does one of the following:
• Touches the display panel
• Lifts the ADF
• Sets an original in the ADF
Screen Startup Mode
There are two screen startup modes. The factory default setting is Normal.
1. Normal
This is the standard startup mode. When the main power of the MFP is turned ON, the
control panel starts up using less power compared to Quick mode.
2. Quick
By preparing for the next startup when the machine shuts down, the control panel starts up
faster than in Normal mode.
Screen Startup Mode can be changed in Screen Features Settings.
Select [Settings] > [System Settings] > [Machine] > [Power/Energy Saving] > [Control Panel
Startup Mode], and then select [Normal] or [Quick].
To Next Page
Loading...
