Paper Feed
D0CA/D0C9/D0C8/D0CB 4-172 SM
• When installing the draw-in unit, fit the bracket’s holes onto the bosses on the
mainframe. (
× 4)
4.15.2 IM C400 SERIES
Pick-up roller/Paper feed roller/Friction roller
Before replacing the Pick-up roller,Paper feed roller and Friction roller,
reset the PM counter.
1. Turn the power ON.
2. Reset the PM counter. (Refer to Replacement Procedure of the PM/Yield Parts)
3. Turn the power OFF.
Pull out the paper feed tray.
1. Remove the waste toner bottle.(Waste Toner Bottle)
2. Remove the roller holder [A].
To Next Page
Loading...
