UP/SP Data Import/Export
D0CA/D0C9/D0C8/D0CB 5-64 SM
Item Specification Note
Secret Secret information is exported if you
select "Secret" setting.
Secret information
#1. Data that cannot be exported without
being encrypted.
(Exported data is encrypted.)
Example: Password / Encryption key / PIN
code
#2. Confidential information for the
customer
Example: User name / User ID /
Department code / Mail address / Phone
number
#3. Personal information
Example: Document name / Image data
#4. Sensitive information for the customer
Example: MAC address / Network
parameters
* The IP address is exported when both 'Unique' and 'Secret' are selected.
6. Select "Crypt config" setting (Encryption).
Encryption Select whether to encrypt or not
when exporting.
If you push the "Encryption" key,
you can export secret information.
If the encryption function is used, setting of
an encryption key is required by direct
input.
• Type the arbitrary password using the
soft keyboard
• Can enter up to 32 characters
7. Press [Execute].
8. Press [OK].
• If data export/import fails, the details of the error can be viewed in the log.
Importing Device Information
Import device information saved on an SD card.
1. Insert an SD card into the media slot on the side of the operation panel.
2. Enter SP mode.
3. Press SP5-749-101(Import/Export: Import)
4. Select a unique setting.
5. Press [Encryption Key], if the encryption key was created when the file was exported.
To Next Page
Loading...
