Firmware Update (Removable Media)
D0CA/D0C9/D0C8/D0CB 5-8 SM
5. After the data waiting screen is displayed, the update is automatically started. When the
firmware update is complete, "Update done" is displayed.
The figures at the lower right of the display indicate "Number of updated items/ All items to
be updated".
6. Turning the main power OFF.
7. Remove the SD card.
8. Turn the main power ON again, and check whether the machine is operating normally.
9. Return the SD card slot cover to the original position.
Using the Slot on the Operation Panel (Immediate Update)
1. Enter the SP mode.
2. Touch [Firmware Update].
To Next Page
Loading...
