Drive
D0CA/D0C9/D0C8/D0CB 4-150 SM
Remove the following parts.
• Right Rear Cover
• Rear Cover
• Upper Left Cover
• Left Cover
• Controller Box
• PSU Exhaust Fan (FAN4)
• PSU (AC) (PCB17), PSU (DC) (PCB16)
• High-Voltage Power Supply (Development) (PCB22)
• High-Voltage Power Supply (Transfer) (PCB23)
• Fusing Motor (M13)
• Paper Transport Motor (M12)
1. Remove the gear cover [A] and grounding plate [B].
2. Remove the gear [C].
3. Remove the paper transport Unit [D].
4. Remove the paper transport unit cover [A].
To Next Page
Loading...
