ADF
SM 4-67 D0CA/D0C9/D0C8/D0CB
&
Adjustment
When reattaching the ADF inner cover [A], move it under the coupling shaft (marked by the
dashed circle) of the original feed unit, and then you can install the ADF inner cover
correctly.
Adjustment after CIS Unit Replacement
Correct the color deviation of the CIS (S21) after replacing the ADF unit or CIS unit.
1. Perform the registration adjustment of the ADF (back side). (ADF Side-to-Side and
Leading Edge Registration)
2. Print an ACC test pattern.
[Settings] icon > [Maintenance] > [Auto Color Calibration] > [Copier Function] > [Start Auto
Calibration] > [Start Printing]
3. Press [Stop].
An error screen will be displayed if [Start Scanning] is pressed.
To Next Page
Loading...
