Ricoh IM C300

Main Machine Installation: Installation Procedures
SM 2-33 D0CA/D0C9/D0C8/D0CB
Installation
Select the check boxes of the applicable days to prohibit updating.
2.4.9 SETTINGS RELEVANT TO THE SERVICE CONTRACT
Change the necessary settings for the following SP modes if the customer has made a service
contract.
SP No. Function Default
SP5-045-001
Counter method
Specifies if the counting method used in meter charge mode
is based on developments, prints, or coverage.
"1": Prints
SP5-104-001
(SSP)
A3/DLT double
count
Specifies whether the counter is doubled for A3/DLT size
paper.
"0":Single
counting
SP5-812-001 and
-002
Service Tel:
Telephone /
Facsimile
-001: shows or sets the telephone number of the service representative.
-002: shows or sets the fax number of the service station. The number is
printed on the counter list when the "Meter Click Charge" is enabled. The
user can send a fax message with the counter list.
Counter Display Method
There are 3 types (Developments, Prints, and Coverage). The display mode can be set by
SP5-045-001 (Accounting counter: Counter Method).
Value Mode Descriptions
0 Development Count YMC Development Counter
Bk Development Counter
1 Print Count
(Default)
Color Copy Counter
B&W Copy Counter
Color Print Counter
B&W Print Counter