Scanner Service Mode
SM Appendices
3-437 D0CA/D0C9/D0C8/D0CB
SP Mode Tables
2-021-003 Comp3:5-95 *CTL [5 to 95 / 65 / 1 /step ]
2-021-004 Comp4:5-95 *CTL [5 to 95 / 80 / 1 /step ]
2-021-005 Comp5:5-95 *CTL [5 to 95 / 95 / 1 /step ]
2024 [Compression ratio of ClearLightPDF]
Selects the compression ratio for clearlight PDF for the two settings that can be
selected at the operation panel.
2-024-001 Compression Ratio(Normal) *CTL [5 to 95 / 25 / 1 /step ]
2-024-002 Compression Ratio(High) *CTL [5 to 95 / 15 / 1 /step ]
2025 [Compression ratio of ClearLightPDF JPEG2000]
Selects the compression ratio for clearlight PDF for the two settings that can be
selected at the operation panel.
2-025-001 Compression Ratio(Normal) JPEG2000 *CTL [5 to 95 / 25 / 1 /step ]
2-025-002 Compression Ratio(High) JPEG2000 *CTL [5 to 95 / 15 / 1 /step ]
2030 [OCR PDF DetectSens]
2-030-001 White Lumi Value: 0 - 255 *CTL [0 to 255 / 250 / 1 / step]
2-030-002 White Pix Ratio: 0 - 100 *CTL [0 to 100 / 80 / 1 / step]
2-030-003 White Tile Ratio: 0 -100 *CTL [0 to 100 / 80 / 1 / step]
2031 [Vertical Judgment Setting]
001 Function Setting: 0 - 1 *CTL [0 to 1/ 0 / 1 / step]
0:Enable
1:Disable
When the image does not become upright state due to the vertical judgment error, set this
SP to "0: Disable". After changing the setting, turn OFF/ON the main power.
002 Algorithm Setting: 0 - 2 *CTL [0 to 2 / 0 / 1 / step]
0: Normal Algorithm
1: Simple Algorithm
2: Composite Algorithm
Set the identification algorithm when SP2-031-001 is "1: Enable". Change the setting
when the vertical judgment error occur frequently. After changing the setting, turn OFF/ON
the main power.
3.12.3 SP3-XXX
3044 -
3-044-001 - CTL* [0 to1 / 1 / 1 / -]
To Next Page
Loading...
