ADF Unit
D0CA/D0C9/D0C8/D0CB 7-24 SM
7.2.2 ORIGINAL TRANSPORT DRIVE
The ADF motor (M8) [A] drives all ADF rollers via gears.
The original feed clutch (CL4) [B] controls the mechanism for picking up the original.
7.2.3 ORIGINAL SET DETECTION
When an original [A] is placed on the original tray correctly, the original set sensor actuator [B] is
pushed up and the original set sensor (S22) [C] turns off (not interrupted). The machine judges
this state as the placement of an original.
The stopper [D] prevents the user from placing originals too far into the feeder.
To Next Page
Loading...
