UP/SP Data Import/Export
SM 5-61 D0CA/D0C9/D0C8/D0CB
Maintenance
Exporting Device Information
This can be exported / imported by an administrator with all privileges.
When exporting SP device information from the operation panel, the data is saved on an SD
card.
1. With the Copy/Printer/Scanner/Fax/Settings screen open, insert an SD card into the media
slot on the side of the operation panel.
2. Log in from the operation panel as an administrator with all privileges.
3. Press [Settings] on the Home screen > [System Settings].
4. Press [Settings for Administrator] > [Data Management] > [Device Setting Information:
Export (Memory Storage Device)].
5. Set the export conditions.
• Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device
Unique Information" includes the IP address, host name, fax number, etc.
• Specify an encryption key.
6. Press [Run Export].
7. Press [OK].
8. Press [Exit].
9. Log out.
• If data export fails, the details of the error can be viewed in the log.
• When device Information is periodically imported, it is necessary to create the device
setting information file with special software and store it on the web server.
To Next Page
Loading...
