Main Machine Installation: When Moving the Machine
D0CA/D0C9/D0C8/D0CB 2-38 SM
2.5 MAIN MACHINE INSTALLATION: WHEN MOVING THE
MACHINE
• Do not lift the machine with any optional paper feed units attached.
If the machine already has one or more optional paper feed unit(s) attached, be sure
to disconnect the machine and paper feed unit(s), and lift them up separately when
moving/transporting. Otherwise, the handle of the paper feed unit will break due to the
machine’s weight, and it can cause an injury.
The following should be done before transporting the machine.
1. Remove the paper tray and waste toner bottle, and then move the ITB contact lever down
to the shipping position.
IM C400 series does not need to remove the tray.
• This moves the ITB away from the PCDU (K).
2. Hold the lever [A] in this position with securing tape.
3. Do SP4-806-001 (Carriage Retract Operation) to move the scanner carriage from the
home position.
This prevents dust from falling into the machine during transportation.
4. Remove the toner bottles.
This prevents toner flowing into the toner supply tube due to vibration during transport. This
can also cause the tube to be clogged with toner.
To Next Page
Loading...
