Main Machine Installation: Installation Procedures
D0CA/D0C9/D0C8/D0CB 2-32 SM
Specifying the Time and Day of the Week to Prohibit Updating via Web
Image Monitor
1. Start Web Image Monitor.
2. Log in as the machine administrator.
3. Go to [Device Management], and then click [Configuration].
4. Click "Auto Firmware Update".
Turn the main power OFF and back ON again after setting SP5-886-111
(AutoUpdateSetting) to "1 (ON)". "Auto Firmware Update" will appear in the menu list of
Web Image Monitor.
5. Specify the times and days of the week to prohibit updating.
To Next Page
Loading...
