New Functions
D0CA/D0C9/D0C8/D0CB 7-128 SM
• Font Change Confirmation screen
The “Font Change Confirmation” screen is accessible only when Clone PS is used.
On the Home screen, select the Settings icon > Printer Settings > PS Menu > Font Change
Confirmation.
Difference in Device Fonts
The variety and number of built-in fonts (device fonts) differ between Adobe PS and Clone PS.
PS type Number of European fonts
Adobe PS 136 fonts
Clone PS 93 fonts
For license reasons, the device fonts for Adobe PS cannot be handled by Clone PS. Instead,
Clone PS is equipped with fonts similar to Adobe device fonts under different names; when an
Adobe PS font is specified in the data to be printed, Clone PS will replace it with a similar font.
Use of a substitute font sometimes leads to different printing results, as shown in the table
below.
Example 1
PS
type
Helvetica
Adobe
PS
Clone
PS
When Helvetica is used in the original document, Clone PS applies a substitute font
named NimbusSans-Regular, maintaining almost the same appearance as the original
data.
To Next Page
Loading...
