Main Machine Installation: Installation Procedures
SM 2-19 D0CA/D0C9/D0C8/D0CB
• The Program/Change Administrator screen is displayed at the first power-up. Follow
the procedure in Main Machine Installation: Important Notice on Security Issues.
18. After the toner initialization is completed, the machine beeps, and the following message is
displayed. Turn the main power OFF and back ON again.
• DO NOT switch OFF the main power until the machine finishes the initial settings and
emits a beep sound.
2.4.3 CLEANING CLOTH HOLDER
1. Clean the surface before placing the cleaning cloth holder.
2. Attach the cleaning cloth holder [A] to the left side of the scanner and put the cleaning cloth
into the holder.
To Next Page
Loading...
