Printing Features
SM Appendices
4-7 D0CA/D0C9/D0C8/D0CB
Software
Configuration
A 3-page job. Page 1 has the PCL simplex command. Page 2 and 3 have the PCL duplex
long-edge bind commands.
No finishing options (staple, punch, z-fold) are used.
Bit Switch #5-6=0:
Bit Switch #5-6=1:
• Used in conjunction with Bit Switch #5-6, Orientation Auto Detect for PS/PDF jobs
might cause unexpected results.
4.2.4 PJL USTATUS
Printer Bit Switch description
Bit Switch 9-4
These control the way PJL USTATUS returns page count totals in cases where multiple copies
of a job are being printed.
BitSw 9-4=0 (default):
This change the way an MFP/LP rotates PCL, PS, PDF, or RPCS print images.
1. The page count for a single copy is returned after the first copy is printed.
2. The page count for the rest of the copies, excluding the first copy, is returned after all
copies have been printed.
To Next Page
Loading...
