Controller Options
SM 2-151 D0CA/D0C9/D0C8/D0CB
Installation Procedure
• Turn OFF the main power and unplug the power cord from the wall socket. If the main
power is not turned OFF before installing, an electric shock or malfunction might occur.
• When the MFP is already in use (not a new machine) and “Data Encryption Settings” is
enabled, disable Data Encryption Settings before installing this option. If installing
without disabling, the function of the Enhanced Security HDD Option is not
guaranteed.
• When the MFP is already in use (not a new machine), Copy the address book data to
an SD card with SP5-846-051 (Backup All Addr Book) if possible.
1. Remove the standard HDD installed. (HDD)
2. Separate the standard HDD from the bracket.
3. Disconnect the cables from the standard HDD. ( × 2)
To Next Page
Loading...
