Caster Table Type M41 (D3GW03)
SM 2-69 D0CA/D0C9/D0C8/D0CB
Remove the handle [A] attached to the back of the caster table.
1. Attach the handle [A] removed in step 1 to the screw holes on the front of the caster table.
2. Fit the caps [A] in the screw hole of the handle.
3. Attach two pins to the caster table.
Attach the long pin [A] to the right hole and the short pin [B] to the left hole.
To Next Page
Loading...
