Caster Table Type M41 (D3GW03)
D0CA/D0C9/D0C8/D0CB 2-68 SM
11. Secure the 1st level of the optional paper feed unit and the main machine with the two joint
brackets [A].
Use the screws [B] on the main machine
12. Reattach the rear cover of the optional paper feed unit.
13. Loosen the screws of the stabilizer [A] on the front side, lower the stabilizer until the
machine is stable, and tighten the screws.
14. Loosen the screws of the stabilizers on the left, right, and rear sides, lower the stabilizers,
and tighten the screws.
To Next Page
Loading...
