Main Machine Installation: Installation Procedures
SM 2-29 D0CA/D0C9/D0C8/D0CB
Enter the SP mode.
1. Press [Firmware update] > [Update] > [Execute update].
2. Check if one of the following messages appears: "Will you download the latest package Ver
*** and update?" or "The installed package is the latest version.".
If any of these messages appear, ARFU can be executed. Press “No” and close SP mode
to complete the configuration.
The update will run immediately if you press “Yes” at the message "Will you download the
latest package Ver *** and update?" The update cannot be canceled if it is run by SFU.
(The update can be canceled if ARFU is used.)
SP5-886-116 (Auto Update Prohibit Term Setting) displays the scheduled date and time of
the next ARFU.
If error code 71: [Network connection error] appears when you click “Execute update”, see
troubleshooting below.
Ask the customer for the prohibited times and days of the week for ARFU
execution and set the following as needed. The default prohibited time is
from 9 a.m. to 5 p.m. and there is no prohibited day.
• SP5-886-112 (Auto Update Prohibit Term Setting) Default: 1 (ON)
• SP5-886-113 (Auto Update Prohibit Start hour) Default: 9
• SP5-886-114 (Auto Update Prohibit End hour) Default: 17
• SP5-886-120 (Auto Update Prohibit Day Of Week Setting) Default: 00000000 [00H]
Set the bits for the days of the week to prohibit updating.
Prohibited (Monday - Sunday): bit 7, Monday: bit 6, Tuesday: bit 5
Wednesday: bit 4, Thursday: bit 3, Friday: bit 2, Saturday: bit 1, Sunday: bit 0
e.g.) Prohibited on Mon., Fri., Sat., and Sun.: 01000111 [47H]
To Next Page
Loading...
