Firmware Update (Smart Firmware Update)
D0CA/D0C9/D0C8/D0CB 5-16 SM
• The figures at the lower right of the display indicate "Number of updated items/ All
items to be updated".
5.4.3 UPDATE AT THE NEXT VISIT (RESERVE)
It is possible to set the machine to download the package firmware which is necessary for SFU
in advance, and then perform the actual installation at the next service visit. This saves waiting
time for the firmware to download at the service visit.
How to Set the Machine to Download Firmware Later (Reserve)
Enter the [Firmware Update] menu in the SP mode and update the package firmware.
• The [Firmware Update] button will appear even when a machine is connected to
@Remote with a device which does not have an embedded @Remote communicating
function. If an error code is displayed, refer to Firmware Update (Error Screens
During Updating).
1. Enter the SP mode.
To Next Page
Loading...
