Page Keeper Type M28 (D3DQ-17)
SM 2-91 D0CA/D0C9/D0C8/D0CB
4. Attach the double-feed sensor (MFTB) (PCB14) [A] and grounding plate [B] as a set.
(Tapping screw: 3x10)
Disconnect the harness [A] of the ADF top cover [B] from ADF relay
board (PCB13) (CN5), and release the clamp.
1. Remove the harness [A] from the harness guide.
To Next Page
Loading...
