Controller Options
D0CA/D0C9/D0C8/D0CB 2-140 SM
Installation Procedure
• Turn OFF the main power and unplug the power cord from the wall socket. If the main
power is not turned OFF before installing, an electric shock or malfunction might occur.
• Do not put your hand into the controller box. It will result in a malfunction or injury.
• Before doing any work, touch a metal object to discharge static electricity from the
body. There is a possibility that the File Format Converter may malfunction due to
static electricity.
Only one of the following network interfaces can be installed at one time:
• File Format Converter
• IEEE 1284 Interface Board
• IEEE 802.11a/g/n Interface Unit
• Device Server Option
1. Remove the slot cover [A].
2. Install the file format converter [A] into the slot and then fasten it with screws.
When inserting into the slot, push the file format converter until it is inserted properly.
To Next Page
Loading...
