Ricoh IM C300

System Maintenance
SM 8-29 D0CA/D0C9/D0C8/D0CB
Smart
Operation
Panel
Authentication settings
Administrator authentication: OFF
User authentication: OFF
Administrator authentication: ON
User authentication: OFF
Administrator
authentication: ON
User authentication: ON
Screen of the function selected in
[Function Priority]
Screen of the function selected in
[Function Priority]
[Home] screen
When Entry to Service Mode Is Prohibited by the Administrator
The administrator of the MFP can prohibit entry into the control panel’s service mode by
enabling [Settings] > [System Settings] > [Settings for Administrator] > [Security] > [Service
Mode Lock].
When [Service Mode Lock] is enabled, the machine does not enter the service mode even if
you enter the number combination for the control panel’s service mode. There will be beeping
sounds to indicate login failure.
• The machine can enter the recovery mode even if [Service Mode Lock] is enabled.
8.3.3 SERVICE MODE MENU
There are four menus of settings.
• Wireless & networks
• Device
• Personal
• System